IDENTITY MANAGER ARCHITECTURE

On Premises VMware Identity Manager High Available architecture in a single ​da​tacenter

When designing Horizon Apps and VDI environments, VMware Identity Manager more and more becomes an essential part of it. It acts as a central portal providing single sign on access for users to their desktops and applications. Depending on location or permissions authorisation might be more or less restrictive.

In this blogpost I will describe the architecture of VMware Identity Manager as part of a Horizon environment with redundant components in a single datacenter.  I decided to write  an article about this, because I was somehow confused by the existing documentation and it was difficult to  find best practices for this setup. Special thanks goes to Peter Bjork (@thepeb), VMware Principal System Engineer and VMware Identity Manager and Unified Access Gateway Specialist, for providing me the right information and reviewing this document.

The most common use case I come across is this one:

  • Internal users working on thin clients need access to Horizon virtual desktops and applications.
  • Internal users with laptops or workstations want to access their virtual desktops and applications through the Identity Manager user portal.
  • External access to desktops and applications, secured with MFA, should be provided via the same Identity Manager portal.
  • Users connecting from the corporate network authenticate using Active Directory username and password.

Next to these business needs another important requirement is that within a single datacenter SPOFs should be eliminated.

High Level architecture

To meet these requirements, following configuration is needed:

  • Two load balanced internal connection servers (1 and 2) with SAML authentication allowed.
  • Two load balanced external connection servers (3 and 4) with SAML authentication required and Workspace One Mode enabled.
  • Two load balanced Unified Access Gateways in DMZ.
  • Three load balanced Identity Manager Appliances in DMZ with two connectors in LAN.
  • Two IDM connectors to sync AD users/groups, authenticate users against AD and connect with Radius server for MFA authentication.
  • Internal DNS A-record vdi.corp.local matching the load balancers vip of the internal connection servers.
  • Internal DNS A-Record vdiuag.corp.local matching the load balancers vip of the external connection servers.
  • Internal DNS A record portal.corp.com (split DNS required) matching the load balancers vip of the IDM appliances in DMZ. Both A and PTR records are required.
  • Public DNS A-record uag.corp.com for the Unified Access Gateways (UAG) matching the load balancers vip of the UAG’s.
  • Public DNS -record portal.corp.com for external access to the IDM portal

The two internal connection servers will service requests coming from thin clients and users working laptops or workstations on the corporate network. SAML authentication (between IDM and connection servers) will be configured and set to allowed (not required). The reason for not requiring SAML is that thin clients will access the connection servers directly, bypassing IDM. They will authenticate directly to the connection server with their AD username and password. Users working on  a laptop or workstation however, will first browse to the IDM portal and start their desktop or application from there. Authentication between IDM and Horizon is SAML.
Both connection servers 1 and 2 will be load balanced. Thin clients will be configured with the load balanced url (vdi.corp.local)

The IDM portal will be setup in DMZ.  Users sessions from the external network as well as from the internal network will all pass via this IDM portal. For HA reasons three appliances are needed.
To setup the IDM cluster the database must be SQL. The internal Postgress database is not supported in this scenario. To avoid SPOF, the SQL database should be hosted on a SQL Always On Cluster.

Two IDM connectors will be installed in the trusted network. These connectors handle AD authentication requests, sync AD users and groups, provide access to the Horizon environment and sync Horizon Pools and assignments. Only outbound connections over TCP port 443 will occur  between these connectors in the trusted network and the IDM appliances in DMZ. A load balancer in front of the two IDM connectors is not required, unless you are planning on doing kerberos authentication (which is out-of-scope here). Also, make sure each IDM node is accessible by both connectors.
On both connectors the PasswordIdpAdapter and RadiusAdapter must be enabled and configured.
In IDM, create an AD Integrated Windows Authentication directory. The connectors bind to AD using this directory. To configure outbound-only mode, associate the connectors with the built-in identity provider.

REMARK: only 1 connector can do AD sync. In case this connector is not available the other connector should be manually selected. Authentication will be done by both connectors.

In IDM two network zones will be configured: an internal one and an external one. The connection server url matching the internal zone will be set to vdi.corp.local.
The url matching the external network zone will be uag.corp.com. This dns record should be publicly available.

Two Unified Access Gateways will be setup in DMZ behind the load balancer. These appliances provide external access to the Horizon desktops and applications. IDM will redirect request coming from the external network to the load balancer’s vip of the UAG’s. Authentication will be handled by IDM.
Configure the following URL’s on the UAG’s:
Connection server URL = vdiuag.corp.local.
Tunnel URL = uag.corp.com.
Blast External URL = uag.corp.com
PCOIP External URL = <public ip>:4172

To force and redirect all external user requests to the IDM portal, you must set SAML authentication to Required on the two external connection servers (3 and 4) and enable Workspace One Mode. On the UAG appliances set the Horizon URL to vdiuag.corp.local or the load balancers vip of the external connection servers. As a result, users trying to access the UAG servers (uag.corp.com) directly from the Horizon client, will be redirected to the IDM portal, honouring all authentication requirements such as MFA for external users.

For detailed info on how to configure the different components, see the following links to the VMware documentation:

IDM installation:

https://docs.vmware.com/en/VMware-Identity-Manager/3.2/vidm-install/GUID-A29C51E5-6FF5-4F7F-8FC2-1A0F687F6DC5.html

IDM connector configuration:

https://docs.vmware.com/en/VMware-Identity-Manager/3.2/vidm-dir-integration/GUID-F0D9C0D6-E9D9-42E4-B7F9-E44E727BB07A.html

IDM connector high availability configuration:

https://docs.vmware.com/en/VMware-Identity-Manager/3.2/com.vmware.aw-enterpriseSystemsConn/GUID-32E67D59-B73C-41EF-8683-F250CB15EDE4.html

Configure IDM connector in outbound mode only:

https://docs.vmware.com/en/VMware-Identity-Manager/3.2/com.vmware.aw-enterpriseSystemsConn/GUID-C97A4D37-8F1F-4B24-9A97-1A25A0033999.html

Configure multiple client access url’s:

https://docs.vmware.com/en/VMware-Identity-Manager/3.2/com.vmware.wsp-resource/GUID-32752D1B-3937-490D-8136-D5EA664F1F8E.html

Please follow and like us:
error